FEEDBACK
PLEASE WAIT ...
CLOSE
CLOSE

Country

Document

Catalog 0.21 MB
Registration Date 10 Aug 2018
Revision Date 10 Aug 2018
Share

QSensor QSX 301 Gold

(0)

Electronics Sensor

Sensor

Applications

Analyzing surface phenomena Thin film formation Acoustic resonator based instruments

Manufacturer's Description

The sensor is a critical part of a QCM-D experiment; in order to ensure optimal results in your lab, we therefore guarantee the quality and stability of all our standard QSensors. We offer a wide range of coatings, as well as customized coatings.

Quartz Crystal Microbalance with Dissipation monitoring (QCM-D) is a real-time, nanoscale technique for analyzing surface phenomena including thin film formation, interactions and reactions.

A QCM sensor consists of a thin quartz disc sandwiched between a pair of electrodes. The sensor can be excited to oscillate at its resonance frequency by the application of an alternating voltage. The resonance frequency depends on the total oscillating mass of the sensor and sensor surface adhering layers, including coupled water. The frequency decreases when a thin film is attached to the sensor. If the film is thin and rigid the decrease in frequency is proportional to the mass of the film. In this way, the QCM operates as a very sensitive balance. Unlike all other QCMs, QCM-D monitors the frequency and energy dissipation response of the freely oscillating sensor, thus generating results more accurately and faster.

Common applications of QCM-D include measurements of proteins, polymers,surfactants and cells interacting with surfaces in liquid.

The amount of water in an adsorbed film can be as high as 95% depending on the kind of molecule and the type of surface you are studying.

If some elongated molecules adsorb flat on a surface, little water will be coupled to the molecules. However, if they adsorb standing up, lots of water will be coupled. The kinetics of structural changes and mass changes involved are obtained simultaneously with QCM-D.

You can view an animation here to learn more about the measurement principle and the type of data that can be obtained with QSense® QCM-D. The animation also highlights common application areas, shows the set-up and how the instrument is operated.

Unlike all other QCMs, QCM-D monitors the frequency and energy dissipation response of the freely oscillating sensor. It is faster and more accurate than the usual frequency sweep principle. You can watch a demonstration of the principles behind the QCM-D technology in the video below.

A QCM sensor consists of a thin quartz disc sandwiched between a pair of electrodes. Due to the piezoelectric properties of quartz, it is possible to excite the crystal to oscillation by applying an AC voltage across its electrodes. Normally the electrodes are made of gold, which can be coated with a wide range of different materials.

The resonance frequency (f) of the sensor depends on the total oscillating mass, including water coupled to the oscillation. When a thin film is attached to the sensor, the frequency decreases. If the film is thin and rigid the decrease in frequency is proportional to the mass of the film. In this way, the QCM operates as a very sensitive balance.