Electronics Sensor Product Number : PPP-NCLAuD-10Afm Tip
guaranteed tip radius of curvature < 10 nm tip height 10 - 15 µm highly doped to dissipate static charge Au coating on detector side of cantilever chemically inert
The Point Probe® Plus (PPP) combines the well-known features of the proven PointProbe® series such as high application versatility and compatibility with most commercial SPMs with a further reduced and more reproducible tip radius as well as a more defined tip shape. The typical tip radius of less than 7 nm and the minimized variation in tip shape provide more reproducible images and enhanced resolution.NANOSENSORS™ PPP-NCLAuD probes are designed for non-contact mode or tapping mode AFM (also known as: attractive or dynamic mode). The NCL type is offered as an alternative to NANOSENSORS™ high frequency non contact type (NCH). PPP-NCLAuD is recommended if the feedback loop of the microscope does not accept high frequencies (400kHz) or if the detection system needs a minimum cantilever length >125µm. Compared to the high frequency non-contact type NCH the maximum scanning speed is slightly reduced. This probe type combines high operation stability with outstanding sensitivity and fast scanning ability.A metallic layer (Au) is coated on the detector side of the cantilever which enhances the reflectivity of the laser beam by a factor of about 2.5. Furthermore it prevents light from interfering within the cantilever. The virtually stress-free coating is bending the cantilever less than 2 % of the cantilever length.