FEEDBACK
PLEASE WAIT ...
CLOSE
CLOSE

Manufacturer

Country

Document

No Title 0.03 MB
No Title 0.23 MB
Registration Date 11 Mar 2016
Share

PointProbe® Plus - High Quality-Factor - Non-Contact/ Tapping Mode - High Resonance Frequency - Reflex Coating

(0)

Electronics Sensor Product Number : PPP-QNCHR-10

Afm Tip

Nanomaterials

Manufacturer Asserted

Aluminum

Al Nanostructure Coating CAS Number : 7429-90-5
Density : 30 nm

Applications

Atomic force microscope (AFM) tips AFM imaging

Properties

guaranteed tip radius of curvature < 10 nm tip height 10 - 15 µm highly doped to dissipate static charge Al coating on detector side of cantilever chemically inert excellent mechanical Q-factor under UHV conditions for high sensitivity

High sensitivity Fast Scanning Ability Dissipate Static Charge Enhanced Resolution Excellent Mechanical Q-factor under UHV Conditions

Manufacturer's Description

The new PointProbe® Plus Q30K-Plus combines the well-known features of the proven PointProbe® Plus series such as a further reduced and more reproducible tip radius (typical tip radius less than 7 nm) as well as a more defined tip shape with a high mechanical quality factor (Q-factor) under ultra high vacuum (UHV) conditions. The typical Q-factor of over 35000 under UHV conditions and the aluminum coating on the detector side provide excellent resolution and an enhanced signal to noise ratio.NANOSENSORS™ PPP-QNCHR probes are designed for non-contact mode or tapping mode AFM (also known as: attractive or dynamic mode) under UHV-conditions. Due to its high Q-factor and the typical features of the PPP series this AFM probe combines high operation stability with outstanding sensitivity and fast scanning ability.The reflex coating is an approximately 30 nm thick aluminum coating on the detector side of the cantilever which enhances the reflectivity of the laser beam by a factor of about 2.5. Furthermore it prevents light from interfering within the cantilever. The virtually stress-free coating is bending the cantilever less than 2% of the cantilever length.