FEEDBACK
PLEASE WAIT ...
CLOSE
CLOSE

Country

Document

datasheet 1.27 MB
Registration Date 5 May 2016
Share

Nano DAC™

(0)

Electronics Integrated Circuits Product Number : AD5625

Integrated Circuits (ICs)

Applications

Process control Data acquisition systems Portable battery-powered instruments Digital gain and offset adjustment Programmable voltage and current sources Programmable attenuators
Portable battery-powered instruments Digital gain and offset adjustment Programmable voltage and current sources Programmable attenuators Process control Data acquisition systems

Properties

Low power Smallest pin-compatible Quad nanoDACs

Low power consumption Smallest pin-compatible Quad nanoDACs

Manufacturer's Description

The AD5625R/AD5645R/AD5665R and AD5625/AD5665 members of the nanoDAC® family are low power, quad, 12-/ 14-/16-bit, buffered voltage-out DACs with/without an on-chip reference. All devices operate from a single 2.7 V to 5.5 V supply, are guaranteed monotonic by design, and have an I C-compatible serial interface. 2 The AD5625R/AD5645R/AD5665R have an on-chip reference. The LFCSP versions of the AD5625R/AD5645R/AD5665R have a 1.25 V or 2.5 V, 10 ppm/°C reference, giving a full-scale output range of 2.5 V or 5 V; the TSSOP versions of the AD5625R/ AD5645R/AD5665R have a 2.5 V, 5 ppm/°C reference, giving a full-scale output range of 5 V. The WLCSP has a 1.25 V reference. The on-chip reference is off at power-up, allowing the use of an external reference. The internal reference is enabled via a software write. The AD5625/AD5665 require an external reference voltage to set the output range of the DAC. The device incorporates a power-on reset circuit that ensures that the DAC output powers up to 0 V (POR = GND) or midscale (POR = V DD ) and remains there until a valid write occurs. The on-chip precision output amplifier enables rail-to-rail output swing.