Registration Date 15 Jan 2018
Revision Date 15 Jan 2018

OrganoClay MCM-830P


Environment Water and Wastewater

Water Filtration Media


Manufacturer Asserted


Nanoparticle /Nanopowder CAS Number : 1302-78-9
Diameter : 2 nm


Waste water purification Reverse osmosis Chemical separation systems Clarifiers Oil-water separator


Oil removal Grease removal Hydrocarbon Removal

Manufacturer's Description

Ecologix OrganoClay - MCM-830P is a modified clay mineral designed for use as a filter media in process and wastewater treatment. When used alone, OrganoClay removes oil at 700% the rate of activated carbon. When used as a pre-treatment for activated carbon in applications involving oil and grease removal, OrganoClay removes the oil and grease effectively, allowing the activated carbon to remove the soluble organic compounds more efficiently.  Request a Quote
The main difference between Ecologix OrganoClay - MCM-830P and other organoclays is that our media is 100% non-swelling modified clay and does not require blending with anthracite for porosity in a filter bed. This means that filter beds typically run 2-3x longer than filters using competitive (30/70 and 40/60 - clay/anthracite blends). In addition, because Ecologix OrganoClay - MCM-830P has a greater amount of "actives," it may also remove contaminants present at lower levels better than competitive medias.
MCM-830P OrganoClay is a powerful, selective adsorbent that will recognize hydrocarbons and other pollutants - but not water. Designed for use in conventional liquid-phase filtration vessels, the granular modified clay attracts contaminants like a magnet and locks them in its molecular structure. MCM-830P Modified Clay Media is produced in a proprietary process by combining sodium montmorillonite clay with a cationic quaternary amine salt, which replaces adsorbed sodium by ion exchange. Resulting clay surfaces become organophilic.
Extensive application use and field testing of MCM-830P Modified Clay Media technology, verified by independent laboratories, has demonstrated removal of a wide range of contaminants to discharge levels which meet NPDES and other regulatory requirements.When used for water treatment, organoclay is commonly utilized in the upstream sector of the petroleum industry for removing hydrocarbons from refinery process water, but is rarely used in the production of petroleum. Many other industries also use organoclay, including shipping and dockside servicing, car washes, and other businesses that deal with an oily wastewater stream. OrganoClays have also been tested for treating ground and surface water for other organic chemicals such as PCBs and pesticides.
Field testing and project implementation have consistently revealed that the combination of MCM-830P and granular activated carbon effectively removed hydrocarbons from produced water. Treated in field testing revealed specific findings:
Reduces Total Petroleum Hydrocarbons to non-detectable levels. Sampling reveals TPH below detectable limits after adsorption by MCM-830P.Reduces Oil and Grease to non-detectable levels. Samples show Oil and Grease below detectable limits after adsorption by MCM-830P alone.Reduced soluble hydrocarbons Benzene, Ethylbenzene, Toluene, and Xylene to barely detectable levels. In samples BTEX was barely detectable after adsorption by MCM-830P alone. BTEX was below detectable limits after the combination of MCM-830P and granular activated carbon.In simple terms, MCM-830P eliminated hydrocarbon contamination from produced water during the test. Other testing has shown that these results are consistent across large-scale commercial applications.
Effective Water Treatment with Minimal CostOther laboratory testing of spent MCM-830P has shown that BTEX and other volatile hydrocarbons are adsorbed tightly enough for the spent product to pass the EPAs Toxicity Characteristic Leachate Procedure (TCLP) test and be disposed as a non-hazardous waste. The TCLP is used to identify the presence or absence of toxic chemicals that might be able to leach into groundwater after disposal. Being classified as a non-hazardous waste may allow the spent product to be landfilled, land farmed, or otherwise disposed in an economical and ecologically proper manner.
Organoclay Benefits/UsageOrganoClay - A Cost Saving Filtration MediaWhen used alone, OrganoClay removes oil at 700% the rate of activated carbon and will reduce your operating costs by 50% or more. When used as a pre-treatment for activated carbon in applications involving oil and grease removal, OrganoClay removes the oil and grease effectively, allowing the activated carbon to remove the soluble organic compounds more efficiently.
OrganoClay Increases the Efficiency of the Treatment ProcessThe quarternary amine-treated clay pellets have the ability to capture 50 - 60% of their weight in oil, grease and other low solubility organic compounds. Used upstream from activated carbon or downstream of other oil removal processes, OrganoClay optimizes the overall system performance and reduces costs.
Stand AloneOrganoClay outperforms anthracite, GAC, and all other filter media technologies in stand-alone applications for the removal of higher molecular weight hydrocarbons.
Post TreatmentOrganoClay may be applied downstream of oil/water separators, DAF systems, clarifiers, sand filters, and other physical/chemical separation systems.
ApplicationOrganoClay is designed for column operation. The media should be placed in appropriately sized fluid contactor vessels in the same manner as granular activated carbon (GAC). OrganoClay needs to be wetted and deaerated with clean water for a minimum of 1 hour prior to the introduction of contaminants in order to prevent fluid channeling within the media bed.
Pre-TreatmentOrganoClay may be used to pre-treat the influent of GAC filters, reverse osmosis units, ultra filtration units, and other related systems where less soluble, higher molecular weight hydrocarbons tend to cause plugging, fouling, and equipment contamination.
DosageThe amount of OrganoClay required will vary depending on contaminant concentration and type, contact time, and fluid temperature. Generally, contaminants with lower concentrations and solubilities, longer contact times, and moderate fluid temperatures are preferred.
Storage and HandlingStore in a dry place. Avoid extreme temperatures. Avoid breathing dust.
Hydrocarbon Removal with OrganoClayMCM-830P completely removes free hydrocarbons from wastewater and also removes dissolved hydrocarbons including benzene, toluene, ethylbenzene, and xylene (BTEX). When used in conjunction with a polishing stage of granular activated carbon, Modified Clay Media removes dissolved and free hydrocarbons to levels well below current water quality standards.
Our MCM-830P OrganoClay product can be used to effectively remove oil and other hydrocarbons from water where traditional oil-water separators have had limited success. The product does not absorb hydrocarbons, but rather adsorbs them, which leaves no byproduct from the process. In the adsorbtion process, the quaternary amines create organic pillars between the clay platelets that increase the interlamellar distance and facilitate the formation of a hydrocarbon partition.